Search found 7 matches
- Thu Aug 13, 2020 8:13 am
- Forum: Faults & Technical
- Topic: 2014 3008 1.6 HDi semi auto electrical problems
- Replies: 1
- Views: 4251
Re: 2014 3008 1.6 HDi semi auto electrical problems
Problem sorted. These faults all started a few weeks after i'd the clutch replaced. Eventually the fault was traced to the main engine / gearbox earth. The bolt that holds it in place was ever so slightly loose and so was causing high resistance and upsetting the ECU's. Once the connection was clean...
- Thu Jul 09, 2020 6:37 pm
- Forum: Faults & Technical
- Topic: 2014 3008 1.6 HDi semi auto electrical problems
- Replies: 1
- Views: 4251
2014 3008 1.6 HDi semi auto electrical problems
I've managed to get a download through my diagbox. Faults Listed below - BSI A4A7 - Number plate Lighting Characterisation - Short Circuit to positive Status - Location - Local 9528 - Absence of command of the starter Characterisation - Coherence Status - Location - Local Gearbox - Communication Err...
- Mon Jul 06, 2020 8:47 pm
- Forum: Faults & Technical
- Topic: P0559 Brake Signal
- Replies: 2
- Views: 6586
Re: P0559 Brake Signal
Further to my previous post, the fault has now escalated and now the engine won't even turn over, and just keeps bleeping at me. The car has flagged faults in the following ECUs ESP, Electric Parking Brake and Gearbox. However, when I plug my diagbox v7.83 in to the diagnostic socket, the faults tha...
- Sun Mar 22, 2020 5:28 pm
- Forum: Faults & Technical
- Topic: Piloted Manual Gearbox Oil Grade
- Replies: 1
- Views: 3059
Re: Piloted Manual Gearbox Oil Grade
Found the following information regarding Oil Grades
Main gearbox 75w80
Hydraulics SAE75.
Anyway, clutch and flywheel change has been done. Found that the clutch plate had been contaminated with gearbox oil due to seals failing in the Concentric Slave Cylinder.
Regards,
Graham.
Main gearbox 75w80
Hydraulics SAE75.
Anyway, clutch and flywheel change has been done. Found that the clutch plate had been contaminated with gearbox oil due to seals failing in the Concentric Slave Cylinder.
Regards,
Graham.
- Sun Mar 22, 2020 5:23 pm
- Forum: Faults & Technical
- Topic: P0559 Brake Signal
- Replies: 2
- Views: 6586
P0559 Brake Signal
Has anyone come across the following fault on a 2014 1.6Hdi 115 with piloted gearbox, and what had to be done to cure it?
P0559
- Brake Signal
- Coherence
- Intermittent
All the results I've found mention brake booster, but this was flagged in the Gearbox ECU.
Regards,
Graham.
P0559
- Brake Signal
- Coherence
- Intermittent
All the results I've found mention brake booster, but this was flagged in the Gearbox ECU.
Regards,
Graham.
- Sat Feb 22, 2020 1:38 pm
- Forum: Faults & Technical
- Topic: Date configuration on dashboard incorrect
- Replies: 2
- Views: 2888
Re: Date configuration on dashboard incorrect
was the correct battery removal procedure? If not, the bsi may have been corrupted. Before battery can be removed, you need to open the drivers window and remove the keys from the ignition. Let the car sit for at least 3 mins to allow all systems to shut themselves down correctly. The battery can th...
- Fri Feb 21, 2020 3:45 pm
- Forum: Faults & Technical
- Topic: Piloted Manual Gearbox Oil Grade
- Replies: 1
- Views: 3059
Piloted Manual Gearbox Oil Grade
Could anyone tell me the correct Oil Grade for the Piloted Manual Gearbox in a 2014 1.6e-Hdi Allure? I can't find it anywhere. I have just ordered a complete clutch kit inc DMF and Central Slave Cylinder from Mister Auto which I intend to change in the near future. The car has done 86,000 and the cl...