Dash cam fitting

All Peugeot 3008 related discussions
Post Reply
wildebed
Posts: 4
Joined: Fri May 27, 2022 8:58 pm

Post by wildebed »

I've fitted 3 cameras - actually just one but I've fitted it in 3 cars.
Tried to install it in the 2017 3008 and I've given up. The access to fuses is an absolute joke. There's no diagram in the handbook and, because these are "closed" fuses with no exposed metal on the top, you have to partially extract it to test if it's ignition-on switched.
So.... With immense difficulty, I pulled a 5a fuse and promptly dropped it. No spares are in the fuse box lid (how cheap are they FFS?). Got some new ones and spent about an hour trying to put it back in.
The camera is going on the accessory plug with the wire dangling down until I develop the patience to attempt the job again.

Kon-Tiki
Posts: 1
Joined: Sun Jul 03, 2022 11:40 am

Post by Kon-Tiki »

Find a suitable fuse and use a ‘piggyback’ lead.
wildebed
Posts: 4
Joined: Fri May 27, 2022 8:58 pm

Post by wildebed »

Yeah, I know that. My point is that the fusebox is inaccessible.
Post Reply