120 hp 1.6 hdi blue ETA6 2015 front near side clunking
Posted: Tue Aug 06, 2019 5:37 pm
At a big loss and need some urgent help please. Have searched the site to see if anyone had my issue but nothing spotted.
Out of nowhere came a metalic clunking that starts at very low speed over humps or even slight road ripples. The noise can only be heard from inside and sound like its coming from behind the passenger glove box. Car drives fine and no other sounds other than the clonking. So far I have disconected the anti roll bar link. No change. Now re fitted. Have had the breaks apart but all ok. No change. Checked spring. Upper mount. Lower ball joint. Track rod end. Checked the lower wish bone mounts. All to no evail. Have checked engine mounts etc. Steering rake is all tight. The noise is present even if free wheeling. Same if going backwards. Same with engine off and rolling. However today I discovered that if I left foot braked and kept the power on the noise goes. Even if coasting or rolling the noise goes when breaking. Re looked at breaks but absolutely nothing wrong with them. Any ideas welcome. Please.
Out of nowhere came a metalic clunking that starts at very low speed over humps or even slight road ripples. The noise can only be heard from inside and sound like its coming from behind the passenger glove box. Car drives fine and no other sounds other than the clonking. So far I have disconected the anti roll bar link. No change. Now re fitted. Have had the breaks apart but all ok. No change. Checked spring. Upper mount. Lower ball joint. Track rod end. Checked the lower wish bone mounts. All to no evail. Have checked engine mounts etc. Steering rake is all tight. The noise is present even if free wheeling. Same if going backwards. Same with engine off and rolling. However today I discovered that if I left foot braked and kept the power on the noise goes. Even if coasting or rolling the noise goes when breaking. Re looked at breaks but absolutely nothing wrong with them. Any ideas welcome. Please.